What is a click floor?

Click floors are a relatively new type of floor, which is particularly characterized by how easy it is to lay. Click floors basically consist of three different elements. At the bottom there is wood, in the middle usually plywood or chipboard and at the top there will again be wood or plastic.

The upper element can look like many different types of wooden floors , so that you can get exactly the look you are after.

When it needs to be installed, you must not use nails, glue or screws. It actually just needs to be clicked together, and is almost as easy as building with LEGO. So even for the most inexperienced handyman, laying a click floor should be a manageable project.

Wide selection of click floors

At Gulvlageret you can always find a wide selection of smart, high-quality click floors. The smart floor type is both hard-wearing and durable, just as it is extremely nice to look at.

Click floors can vary greatly in appearance, which you will also be able to see in our selection. There are many options here, so you can find a click floor that suits your taste. Regardless of whether you prefer a concrete look or whether you would like the herringbone parquet, you can find it as a click floor at Gullvageret.

How do you lay a click floor?

After all, click floors are known for being incredibly easy to lay, which appeals to many people. And compared to laying a 'normal' floor, it is also a somewhat easier process.

The most voluminous part consists almost in the preparation itself. Here it is important to do the processing properly, so that the actual installation of the click floor takes place as easily and painlessly as possible.

First of all, of course, you need to find out how much material you need in order to lay a click floor that fills the entire area. When you have measured, you should always add about 5% extra to the amount, so that you are absolutely sure that there is enough.

It is also important to check whether the substrate is suitable enough for you to lay a click floor. And when we write that the conditions must be reasonably good, it primarily means that the surface must be as flat as possible. There must be a maximum level difference of 2 mm per 2 metres. If the room has too great a level difference, you should correct the problem before the click floor is laid. It can, for example, is done with a special putty compound which is applied to the subfloor. Here it is always good to consult a professional.

When the click floor itself has to be laid, it should be relatively painless. There is always a guide with the individual floor, which explains in an easy-to-understand way how the individual floor should be laid.

In general, it takes place in such a way that on each individual board there will be a 'fer' and a 'groove'. It is an expression of the sides of the board, and is simply an expression of which way the boards must face each other. The 'fern' is the one that sticks out, and the 'note' is where the 'fern' must be inserted. When you do this, the boards lock.

Find your new floor at Floor Warehouse

Regardless of whether you prefer a click floor, a linoleum floor , a wooden floor or something completely different, you can always count on us. We have Denmark's largest selection of floors, which you get at always low prices.

At the same time, we ensure fast delivery, so that your waiting time is no longer than absolutely necessary. Good service is something we attach great importance to, which is why we are also happy to see that our customers reward us with a really nice rating on Trustpilot.

If you have any questions, you are always more than welcome to contact us on + 45 44 92 60 60.