Murtex Silicate Primer 10 liters
Murtex Silicate Primer is a colorless, water-dilutable binder that ensures optimal adhesion for subsequent treatment with Murtex Silicate.
The substrate must be clean, dry (uniformly white-dry), solid, cohesive and free from slurry, cracks, holes, dust, and loose grains of sand. Poorly bonded or infectious substrates are thoroughly cleaned to clean, solid and non-contaminated bottom. Cracks and holes are repaired with e.g. Husfix. Heavily absorbing substrate e.g. old well-cleaned lime base, pre-treated with Murtex Silicate Primer, diluted with 1: 1 water. Substrates that are normally absorbent are treated with Murtex Silicate mixed with Murtex Silicate Primer in the ratio 2: 1. Finished with 1-2 applications with Murtex Silicate. Warning: Murtex Silicate Primer can etch the surface of glass, ceramics, clinker, natural stone, metals, etc. Ensure thorough coverage of areas not to be treated. Wear suitable personal protective equipment such as tight-fitting goggles and rubber gloves. Never measure below 10 ° C or at relative humidity above 80%.
- Gloss: N / A
- Packaging: 10L
- Number of applications / treatments: 1
- Drying time (hours): 1
- Overcoat dry after (hours): 12
- Clean tools with: Water
- Tools: Brush, Roll