FAXE Outside 2
Bleaches and neutralizes the surface. Step 2.
FAXE Uderens 2 is part of a system with 2 active cleaning agents for untreated or oiled wood surfaces which are used in succession. FAXE Uderens 1 deep cleans dirt, gray dyes and corrosion spots, remnants of weathered oil treatments and coatings. FAXE Outside 1 loosens grease and dirt with depth effect, FAXE Outside 2 neutralizes residues of FAXE Outside 1 and light snows the wood. Should not be used on glass or glazed surfaces.
Packaging size: 1 liter
Row capacity: 10-50 m² / l.
Drying time: Approx. 5 hours at 20 ° C.
Application: K brush / brush, water hose, bucket.
Everything that is not to be covered is covered by: terrace, tiles, lawn or the like. The order of application is always FAXE Outside 1 and then FAXE Outside 2. FAXE Outside 1 is mixed in 1-5 parts water and FAXE Outside 2 is mixed in 1-5 parts water, depending on the nature of the surface.
• The tree is moistened. FAXE Outside 1 is applied, scrubbed with stiff brush until the dirt loosens. After 10-15 minutes, rinse with water.
• FAXE Outside 2 is applied to the even wet surface and works for 10-20 minutes.
• Rinse with plenty of water. Then allow the surface to dry.
• Any fiber scraping is sanded with a sanding sponge or sand paper.
For finishing use FAXE Precious wood oil. To refresh the original wood color, it is recommended to use pigmented oils that correspond to the natural hue of the wood.
Cleaning: Clean tools with water.
p H value: 1-2.
Storage: Not less than + 5 ° C.
Water, below 5% nonionic surfactants.
The product is shaken / stirred thoroughly before and during use. If several canisters are to be used for the treatment, all contents must be mixed together before use to ensure a uniform result. It is always recommended to do a small sample for surface, adhesion, and color test.
Subject to technical changes and printing errors.
UN 1760 CORROSIVE LIQUID, NOS