fbq('track', 'Purchase', {value: '0.00', currency:'DKK'});

Ardex K22F - Fiber particle mass

€49.42

ARDEX K 22 F is a low-voltage, fiber-reinforced, self-leveling gypsum mortar for straightening and leveling subfloors before applying floor coverings.

Model: K22F
Weight: 25
Availability: In stock

product Description

Content per sack: 25 kg.

- Pumpable.
- Can be laid out with a toothpick.
- No emissions - EC 1.
- Optimum flow properties.
- For layer thicknesses up to 50 mm.
- Good processing properties.
- Provides a perfect surface for elastic and textile coatings, parquet and tiling.
- Very low voltage, suitable for underfloor heating.
- Pedestrian after 90 minutes.

Can only be used indoors.

Field of application

ARDEX K 22 F is a low-voltage, fiber-reinforced, self-leveling gypsum mortar for straightening and leveling subfloors before applying floor coverings.

Suitable for cast asphalt, hard asphalt adhesive, raw concrete, concrete elements, cement and anhydrite coating, old filler compounds, plaster, gypsum board floors, magnesite, dafoleum, board and chipboard floors (V100) and where a voltage-poor product is otherwise required.

Technical data


consistency Self-leveling
Film thickness Up to 50 mm
material Consumption Ca. 1.5 kg of powder per. m² / mm.
Processing Ca. 30 min. at 20 ° C.
Foot traffic After 1½ hours at 20 ° C
Ready for covering 0 - 3 mm after approx. 1 day. NOTE: For each mm additional layer thickness, one day is added to the drying time.