In Marmoleum Striato original, the palette is neutral with warm tones and trendy shades of gray from light to dark, which look really nice on their own, but also in combination with other floor coverings. The discreet linear pattern will easily match other colors in the surroundings and easily harmonizes with other materials.

Thickness: 2.5 mm
Roll width: 200 cm
Roll length: Up to 32 metres.
NCS: S 2005-Y10R
LRV: 52%

Download:
You can find the cleaning instructions here
You will find the installation instructions here

Durable & hard-wearing floor
97% natural raw materials
72% rapidly renewed materials
43% recycled materials

Highest performance created by nature
The natural and renewable raw materials make Marmoleum the most durable elastic floor on the market. It is PVC-free and contains no plasticizers or mineral oils.

The most important ingredients in Marmoleum are:

• Linseed oil, which comes from the seeds of the flax plant
• Wood flour from controlled forests
• Jute, the natural carrier tissue that forms the backing of linoleum

Marmoleum has the important global environmental certificates such as the Swan and Blue Angel.

Topshield is Forbo's high-performance UV finish, which forms the surface of all Marmoleum court products and tiles. Topshield, which makes the coating resistant to stains, scratches and dirt and creates a long-lasting, beautiful floor. It also makes the floor easier to clean and maintain year after year.

Cleaning of Marmoleum floors
Forbo's floor coverings meet the high demands placed on floors in both private homes and public environments. The floors must be able to function for many years under strong influences and at the same time maintain the good appearance and high performance. There is a clear connection between how floors look and the way you clean and maintain them. The procedure, frequency of cleaning and the means depend on the influences the floor is exposed to.

Easy to mount
In order to achieve a perfect result, it is important that the floor covering is installed correctly. See our installation instructions.

The key factors for a successful installation of a durable floor are the following:
Preparation of the subfloor
Installation of a durable Forbo floor begins with the subfloor, which must be dry, stable and level. Forbo QuickFit is a wood fiber-based, quickly installed, alternative to the traditional subfloor system. Forbo QuickFit is particularly suitable in smaller areas where it is to be installed without the use of nails and glue and in places where there may be additional noise reduction is needed.

Assembly plan
It is important to prepare a good plan before starting the installation. Rooms, materials and subfloors must have a temperature of at least 17 degrees. The materials must have time to acclimatize at least overnight before installation. Forbo offers specially designed mounting tools for transport and rollout, e.g. Forbocar or Forbo Carryset.

Scratching and cutting
A good start is essential: Pay special attention to the first lane! A perfect result is achieved using professional assembly tools.

Sticking
A perfectly installed floor requires perfect adhesion. Remember to drum the floor after installation to achieve a correct glue joint. Always follow the glue manufacturer's instructions. After installation, it is important that the room is ventilated so that the glue can dry. A newly installed floor must not be used or put weight on until the adhesive has dried completely, which typically takes 2 days under normal conditions.

Welding
Welding is done as decoration and/or for cleaning reasons. When the glue has sufficiently hardened, which usually takes a day, the fusible wire can be installed. Follow the instructions in our assembly instructions and on the side of the welding wire roll carefully.

Finish
In order to achieve a professionally finished result, the floor must have a finish, and of course there are many quality products for this purpose. Footboards, stair edges and transition profiles in different materials can be used to create a perfect result.

Forbo also supplies hole systems for finishing against walls.