Trip Trap Wooden flooring

€24.05

Trip Trap Wood Flooring Nature and Extra White is used for basic oil treatment of all untreated and lye treated, ground or new wood floors (indoors).

  • Can be used for all types of wooden floors
  • Suitable for larger areas
  • For mechanical application

På lager

product Details

Trip Trap Wood Flooring Nature and Extra White is used for basic oil treatment of all untreated and lye treated, ground or new wood floors (indoors). Nature is used for dark floors such as merbau, teak, mahogany, cherry, keruing and others. Extra white is used for coniferous floors as well as light hardwood floors such as beech, oak, ash, hevea and others.

The oil treatment can be done both manually and mechanically. Machine oil treatment is recommended for floor surfaces over 15 m².

Work Description

1: Wash the floor with Trip Trap Trees, 1/4 liter to 10 liters of water. Wash with clean water. The floor should then dry for at least 8 hours until completely dry.

2: Shake the can thoroughly. Distribute approx. 1 liter of oil over 10 m² with a paint roller or brush.

3: Leave the oil blank on the surface for 15 minutes. If the oil is quickly sucked into the wood, add more oil.

4: After 15 min. polish the oil into the wood with a polishing pad. Continue polishing until the tree is saturated.

5: Polish the floor with clean cotton cloths before continuing to the next area. Then the floor must not work wet and no excess oil must be left on the surface.

6: Continue according to the above method until the entire floor is treated.

7: Wait min. 6 hours before the floor can be advantageously polished with a polishing pad and a thin layer of oil. Use approx. 1 dl oil per 8 m². Wipe off any excess oil with clean, dry cotton cloths.

8: The floor is hardened after 4 hours at 20 ° C and hardened after 5-7 days.

9: Corridors can be covered with cardboard until the floor is hardened.

 

Technical data

Declaration: Vegetable oil components, pigments (white). Contains Cobalt bis (2-ethylhexanoate) May trigger allergic reaction.

Physical state: Liquid.

Flash point:> 100

Density: 0.88

Cured: 5-7 days (at 20ºC).

Colors: Nature and extra white.

Odor: Weak.

Drying time: 4 hours (at 20ºC).

Tools: Paint roller, brush, roller bucket, extension shaft, rubber gloves.

Tools cleaned with: Water and soap

Disposal: Product residues must be returned to the municipal waste disposal center for chemical waste.

Shelf life: 3 years in unopened condition.

Packaging: 1, 2.5 and 5 liters can.

MAL code (1993): 00-1.

Pr. No .: 2245256.

Storage: Store safely, out of reach of children. Do not expose to heating (eg sunlight). Store frost-free.