Product description & use:
Primer 600 is an acrylic-based primer that is used for pre-treatment before troweling and gluing. The primer ensures effective adhesion between the substrate and putty layer/glue. Primer 600 is used on all absorbent substrates before filling with floor fillers. The primer can also be used to improve adhesion, when gluing on floor fillers and anhydrite.

Physical / chemical data:
Sizes: 1 liter and 5 litres
Type: Water-based acrylic dispersion
Color: White
Consistency: Thin liquid
Dry matter content: approx. 46%
Shelf life: Minimum 2 years in tightly closed packaging when stored in a cool place. Store frost-free

Instructions for use:
Pre-treatment before plastering: Preparation: The substrate must be sufficiently dry and free of grease, dust and loose particles. Primer 600 diluted with water is used on absorbent substrates. On dense substrates such as ceramic tiles, painted surfaces and terrazzo, prime with a so-called "slum layer", which consists of a mixture of water, Primer 600 and Floor putty 656 in the weight ratio 1:1:10.
Application temperature: The temperature of the substrate must not be below 5 °C.
Application: Primer 600 is applied in an even layer with a dense, not too soft, brush. It is important that the primer is worked well into the substrate, so that the best possible contact is achieved. A "bad layer" is applied to the substrate in a layer thickness of 1 - 2 mm. Before troweling, the primer must be completely dry, and a "slime layer" must be white dry.
Drying time: 30 - 60 minutes, depending on the temperature and moisture content of the substrate.
Consumption: 1 liter of DANA Primer 600 covers 10 - 14 m², depending on the absorbency of the substrate.
Cleaning: Primer on the skin is removed with soap and water. Tools are cleaned with water while the primer is still wet.

Download:
Safety sheet