A special glue developed for gluing linoleum. The glue can also be used for gluing needle felt, cork and textile coverings. The glue has good application properties and can i.a. used in areas with heavy loads.

Technical data

Consumption: 3-3.5 m²/ltr.
Assembly time: 0-25 min.

You can read more about the product here!

REQUIREMENTS FOR THE SUBSTRATE

• The substrate must be dry, pressure- and tensile-resistant as well as flat and stable.
• It must be cleaned so that it appears free of grease, oil, soap residue and other separating agents.
• residual building moisture 85% and moisture content in chipboard max. 8-12%.
• In addition, follow Gulvfakta's requirements for the substrate.

RECOMMENDED WORK METHOD

• Feel free to stir the glue before use.
• Follow the recommendations from the coating supplier regarding temperature and RH.
• Linoleum must always be mounted on an absorbent substrate in wet glue.

On absorbent surfaces

• Apply the glue with a notched trowel, e.g. 6121. Do not use more glue than is necessary to get a good adhesion within the assembly time.
• Install the coating as soon as possible or after a short waiting period. The coating is rubbed firmly into the glue so that all air bubbles disappear. For best results, the coating must be rolled after approx. 30-60 min.
• Make sure that there is full contamination to the entire back of the coating.