Provides robust and waterproof connection in the transition between floors and walls. Corner tape consists of PE foam, a central field with self-adhesive butyl and side fields with polyolefin adhesive. The three adhesive fields are protected with silicone-treated foil. The foils each cover an adhesive field, so that installation can be carried out easily and safely. The corner tape provides a robust and waterproof transition in the corners between walls and in the transition between floors and walls.

Field of application:
Corner tape is part of the wet room system. The tape is used to give the transition in corners between walls and in the transition between floors and walls a robust and watertight connection. The tape has particularly good adhesion to solid substrates such as concrete, putty, wet room boards, plaster and waterproof wood fiber boards, old tiles etc.

Assembly:
Corner tape is installed along the entire length/height of the wall with a 1 cm distance to all internal or external corners. Measure up and cut to finished lengths. First remove the middle foil and fold the tape lengthwise so that the adhesive edge faces outwards. Press a putty knife into the fold and stick the tape firmly in the transition between the floor and the wall. Then remove the foil on the part of the tape that faces the wall. Stick/press well with the spatula. Mount the part of the tape that faces down towards the floor in a similar way. See separate assembly instructions. NB: The substrate must be firm, clean, dry and grease-free. Floors/absorbent substrates must always be primed with Adhesive Primer first.

Width: 100 mm.
Length: 15 meters.
Thickness: 0.95 mm.
Material: PE foam