ARDEX K 70 is a cement-based floor filler and thin plaster for screeding and leveling substrates with large level differences.

Content per bag: 25 kg.

Product description
Cement-based floor putty and thin plaster.
Self-leveling with optimal flow properties.
Layer thicknesses from 3 mm to 30 mm without mixing in sand.
For indoor use only.

Field of application
Cement-based floor filler and thin plaster for screeding and leveling substrates with large level differences. Suitable for raw concrete, cement and anhydrite plasters, terrazzo floors, tile and tile coverings, etc. As a wear layer in basements, hobby rooms, hallways, tool rooms, storage and storage rooms, halls and workshops with moderate shock and impact loads. When laying floating wooden floors, a tight moisture barrier must be established on the putty layer, e.g. a 0.20 mm PE foil with at least 200 mm taped joints. When laying fully glued wooden floors,
ARDEX P 40 MS must be applied as a moisture barrier before gluing down.
For indoor use only.

Technical data
Consistency: Smooth and paste-like
Layer thickness: 3-30 mm. must be stretched with sand/gravel for layer thicknesses over 30 mm.
Material consumption: Approx. 1.7 kg. powder per m2/mm.
Processing time: Approx. 30 minutes at 20C
Walkable: After approx. 2 hours at 20C
Ready for coating: After approx. 24 hours at 20C

Download data sheet: click here