Natural oil

Curing oil on a linseed oil basis, high quality and high dry matter content. Can be used on all types of wood and gives the floor a warm glow.
Supplied in 5 lt.

FloorCaot Naturolie is used on all indoor plank and parquet floors,
untreated and lye-treated, where a golden appearance is desired and where
the wood structure in the wood is emphasized.

Job description :
1. The floor must be completely dry, sanded clean and free of grease and dirt.

2. The oil is applied in an even layer in the lengthwise direction of the wood on a small floor area
at a time. Use a roller, sponge etc. Eq. - the oil must lie wet and shiny in it
approx. 15-30 min. - if the oil dries out, more oil is applied during this time.

3. Excess oil is scraped off with a rubber scraper for any next
floor tape.

4. Afterwards, wipe the floor with cotton cloths or polish the wood
longitudinal direction, so that the floor is left uniform without excess oil.

5. For highly absorbent types of wood, re-oiling is recommended after 24 hours.

6. The curing time/drying time of the oil can last from 2-5 days depending on the air temp./
air humidity. During this period, the floor should not be washed or walked on.

7. Oil rags are burned after use to avoid self-ignition.

Maintenance/Aftercare:
The daily cleaning is just vacuuming. When the floor is dirty, greasy or
Eq. wash it in a mild soap mixture with Tip-Top natural soap with a hard
wrung out cloth. When worn, the floor is washed in wood cleaner and re-oiled with FloorCoat
natural oil.