White oil

White pigmented linseed oil based floor oil in the same high quality as natural oil. Gives the floor a bright and modern look. Supplied in 5 lt.

FloorCoat Hvidolie is used on all indoor plank and parquet floors,
untreated or treated with lye, where a whitish appearance is desired.

Job description :
1. The floor must be completely dry, sanded clean and free of grease and dirt.

2. Shake the can thoroughly before use.

3. The oil is applied in an even layer in the lengthwise direction of the wood on a small floor area
at a time. Use a roller, sponge etc. Eq. - the oil must lie wet and shiny in it
approx. 15-30 min. - if the oil dries out, more oil is applied during this time.

4. Excess oil is scraped off with a rubber scraper for possible next
floor tape.

5. Afterwards, wipe the floor with cotton cloths or a polishing machine
the lengthwise direction of the wood so that the floor is left uniform without excess oil.

6. For highly absorbent types of wood, re-oiling is recommended after 24 hours.

7. The curing time/drying time of the oil can last from 2-5 days depending on the air temp./
air humidity. During this period, the floor should not be washed or walked on.

8. Oil rags are burned after use to avoid self-ignition.

Maintenance :
The daily cleaning is just vacuuming. When the floor is dirty, greasy or
Eq. wash it in a mild soap mixture with FloorCoat Natural or White soap,
with a tightly wrung out cloth.
When worn, the floor is washed in wood cleaner and re-oiled with FloorCoat Hvidolie.