Fast, safe and extremely user-friendly membrane solution for floors and walls in wet rooms. With this self-adhesive membrane, you can get a low building height in your wet room as it is glued directly to Nordic floor heating plates. The tiles are mounted directly on the membrane. The membrane cloth is based on a core of PE foam with PP felt on the upper side. The entire underside is coated with an active adhesive that is protected with silicone-treated foil. The foil is divided in two for simple and safe assembly. The membrane cloth is both diffusion and waterproof and, together with the other system components, provides a safe and secure membrane solution. These are also self-adhesive, so it is not necessary to use 2-component glue in connection with the assembly work.

Remember to degrease the surface of the Nordic floor heating plates with a cloth with turpentine or clean gasoline for better adhesion. The system is therefore quick to install. You don't waste time either mixing or applying glue, and there are no drying times either. Tiling can begin as soon as the self-adhesive membrane system is installed – it cannot be done sooner. The membrane cloth is produced under controlled conditions with guaranteed correct membrane thickness and water vapor resistance, which ensures that moisture cannot penetrate the constructions. The membrane system is also recommended by the trade council for wet rooms.

Length: 15 m.
Overlay width: 50 mm.
Thickness: 0.95 mm.
Coverage width: 15.5 m².
Material: PE foam/PP felt
TGA Approved