Content per bag: 25 kg.

Product description
Ready-mixed quick cement with ARDURAPID effect.
For molding: Floors in fixed contact from 20 mm.
For molding: Floating floors from 35 mm.
For indoor use only.

Field of application
ARDEX A 35 MIX is a ready-mixed cement mortar for the production of plaster layers in fixed or floating constructions in homes, offices, institutions, basements and hobby rooms, etc. ARDEX A 35 MIX is laid out in fixed contact on concrete or cement wear layers and in floating constructions on foil or cast batts, etc.
ARDEX A 35 MIX is ready to use after 3 hours and can then be spread over. When screeding with ARDEX A 45, ARDEX K 55, ARDEX A 30 or ARDEX A 31, a dense floor covering can be applied after a further 1 - 2 hours.
The ARDEX A 35 MIX plaster layer is fully usable after only 24 hours. After that, puttying and straightening tasks can be carried out in the normal way, as well as floor covering, tiles and clinker can be laid with all ARDEX products.
When laying floating wooden floors, a dense moisture barrier must be laid beforehand, e.g. a 0.20 mm PE foil with min. 200 mm overlay and taped joints.
ARDEX A 35 MIX is suitable for underfloor heating with a supply temperature of up to 65 °C.
ARDEX A 35 MIX can only be used indoors, and not in permanently water-stressed areas.

Technical data
Consistency: Soil moist
Layer thicknesses: Minimum 20 mm laid out in fixed contact. Minimum 35 mm laid out in floating construction, however minimum 45 mm when gluing tiles. When casting in layer thicknesses over 60 mm, it is important that A 35 MIX is sufficiently compacted.
Material consumption: Approx. 18.5 kg of powder per m2/cm
Processing time: Approx. 1 hour at 20C.
Walkable: After approx. 3 hours at 20C.
Ready for coating: After approx. 24 hours.

Download data sheet: click here