Microdispersion primers – anchoring primers for priming absorbent substrates before painting.

Areas of application: Basic treatment of untreated plaster, plaster, plasterboard, concrete, putty and well-cleaned lime, outside and inside.
Substrate: The substratum must be clean, dry and firm as well as sustainable. Previously limed surfaces are cleaned of loose lime and washed until no longer infectious. Infectious substrates, such as residues from nicotine, stain, soot and the like, are carefully washed off and primed with suitable barrier primers.
Treatment: Stir/shake thoroughly before and during use. Apply by brush, roller or spray. Reason only 1 time. The primer must be completely absorbed by the substrate.
Note: Microdisperse must not be applied so abundantly that a film forms. If the treated surface appears shiny or glossy after drying, it must be sanded before further treatment. Over-priming can cause poor adhesion. Further treatment with a suitable final paint must normally be carried out within 14 days of the basic treatment.

Type: Microdispersion primers
Areas of application: Absorbent mineral substrates, inside and outside
Binder: Acrylic microdispersion
Dilution: Must be diluted with water
Density: Approx. 1 kg/l ISO 2811 Viscosity (DIN4 v.20°C): 6-8 seconds
Consumption: 60-70 ml/m² depending on application method and substrate
Drying time at 20°C/60% RH: 4 hours
Application temperature: Developed for use at 10°C-25°C Min. +10°C - Max. +30°C (substrate and surroundings)
Humidity: Best at 60%-65% RH Min. 40% max. 80% RF
Cleaning of tools: Water and soap
Storage: Store at +5°C-+25°C, out of direct sunlight and out of reach of children
Durability: Min. 24 months after production date (Batch no yymmdd) if stored correctly
Packaging: 2½ and 10 liter cans
Colours: Transparent, added blue roe dye
MAL code: 00-1