Epoxy-polyurethane parquet adhesive with high performance. Suitable for gluing both wooden and laminate floors. Excellent resistance and curing, even when a thick layer is applied, also makes it possible to lay on irregular sub-floors. Its high workability makes mixing and application easier and improves yields. Comes in light "Twin Pack" System with 9+1 kg. which is mixed before use. There is no need for adhesion primer on non-absorbent and metallic sub-floors. When installing on a concrete floor, primer must always be used.

ADVANTAGE

• Elastic and tough
• Odorless and free of solvents
• Long opening hours
• Recommended for underfloor heating systems, REMEMBER that the underfloor heating is switched off a day before installation!
• Good sound insulation
• Can be used for both wooden and laminate floors

TECHNICAL DATA

Density: 1.75 kg/l.
Open time: 60-90 minutes - applies to the whole bucket when mixed!
Walkable: 24 hours for light traffic
Sanding: After 2-3 days when the glue has hardened
Consumption: 900-1400 gr./m2. If the glue is used as a moisture barrier, min. 1400 gr./m2 is used.
Application temperature: +10 to +35 degrees.

If the glue is not to be moisture-proof , glue putty 6118 is used
If the glue is to be moisture-proof, glue putty 6119 is used

Read data sheet here: Tovcol TP2C 2 component parquet glue