MS 1 component parquet glue with a long opening time which is easy to apply. Suitable for all types of wood and sizes of wooden floors. For solid wood suitable up to 200 mm. wide planks. There is no need for adhesion primer on non-absorbent and metallic sub-floors. When installing on a concrete floor, primer must always be used.

ADVANTAGE

• Elastic and tough
• Odorless and without risk symbols
• Easy to clean from finished wood
• Recommended for underfloor heating systems, REMEMBER that the underfloor heating is switched off a day before installation!
• Good sound insulation
• Free from water and solvents

TECHNICAL DATA

Density: 1.7 kg/l.
Open time: 40-60 minutes
Walkable: 6-8 hours for light traffic
Sanding: After 2-3 days when the glue has hardened
Consumption: 700-1200 gr./m2. If the glue is used as a moisture barrier, min. 1200 gr./m2 is used.
Application temperature: +10 to +35 degrees.

If the glue is not to be moisture-proof , glue putty 6118 is used
If the glue is to be moisture-proof, glue putty 6119 is used

Read the data sheet here: Tovcol MS Parquetlim