Vespox EP Primer
If you are looking for a clear, solvent-free 2-component epoxy, which is particularly suitable as a primer for untreated concrete surfaces, then you can take a closer look at Vespox EP-Primer. The primer can be used on old as well as new surfaces, and since it is produced without solvents, it is largely odorless.

Vespox EP-Primer penetrates deep into the substrate and ensures that absorbent materials are saturated before the top layer is applied. Treatment with the primer contributes to strengthening the surface, so that it appears robust and ready for subsequent treatment. In order to achieve the best possible result, it is important that the surface is clean and free of grease and oil residues. In addition, there must be a maximum of 4% moisture in the substrate and the temperature should not be below 10ºC.

Application
1. Mix the two components immediately before application.
2. As the primer/primer must be used within 20 minutes, it is important that you only mix the amount you can manage to use.
3. Use a roller or scraper to distribute approx. 0.3 kg EP-Primer per m2.
4. If the set is to be divided, the division must be carried out according to the technical data sheet.

Product benefits
• Solvent-free and odorless
• Suitable for untreated concrete surfaces

Download user manual:
Vesla, EP Primer