PVC Cold welding agent is used for sealing joints in residential vinyl and PVC coatings.

Content per tube: 44 grams. (enough for approx. 20 meters of assembly)

The patented needle system briefly opens the joint and the cold welding agent runs along the needle into the entire cross-section of the joint. In this way, the adjacent coating edges are moistened by the cold welding agent, dissolve briefly and after a short time fuse firmly and durably together with each other. Be careful and do not use too much.

After approx. 10 minutes the weld is dry. Swelling in the coating may occur but will disappear after a short time. The result is an optically barely visible joint with high joint strength. The collection can be entered after approx. 30 minutes.